7

Routine Maintenance

4 Press [ ] or [] to select <MID>, <LOW>, or <HIGH> press [OK].

OK

SPECIAL MODE M

 

ADJUST./CLEANING

 

 

 

MID

 

6.SPECIAL MODE N

Details of each item are shown below.

<MID>: If normal circumstances, use the default setting. Outputs can be printed by the normal density.

<LOW>: Compensate for poor print quality that occurs when using paper that was stored for a long period of time at high temperature and high humidity.

<HIGH>: Compensate for poor quality that occurs when using heavyweight paper.

The level of the print density is set.

Stop5

Press [Stop] to return to the Standby display.

Prevent Paper Curls or Jams

When the two-sided printing function is used, paper may curl severely or become jammed. Use Special Mode N to prevent paper curling or jamming.

IMPORTANT

Do not use paper that has been exposed to high temperature or humidity for an extended period of time. Two-sided printing on such paper will frequently result in a paper jam.

NOTE

Printing times with Special Mode N activated are longer than when the function is not used.

Additional

1 Press [Additional Functions] [

 

] or [

] until

Functions

 

OK

<ADJUST./CLEANING> appears press [OK].

If necessary, see the screen shots in steps 1 and 2 of "Print Quality and Density Improvement," on p. 7-35.

The <ADJUST./CLEANING> menu appears.

7-36Adjusting the Machine