Auto Paper Selection/Auto Drawer Switching

You can set which paper sources can be used for Automatic Paper Selection and Automatic Drawer Switching. This setting can be made independently for all functions of the machine (Copy, Print, and Fax), and is especially useful when you want to use different paper sources for different purposes.

NOTE

Paper sources set to 'ON' are used for the following functions:

-APS (Auto Paper Selection): The machine automatically selects the appropriate paper size (paper source) based on the original’s size and copy ratio settings (when making a copy), or the set ratio of the image (when receiving a fax).

-ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous print job, the machine automatically selects another paper source with the same paper size, and begins feeding paper from that paper source.

The default settings are 'OFF' for the stack bypass, and 'ON' for the other paper sources.

Additional

1 Press [Additional Functions] [

] or [

] until

Functions

 

 

 

5

OK

<COMMON SETTINGS> appears press [OK].

If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power ON," on p. 5-15.

The <COMMON SETTINGS> menu appears.

Customizing Settings

2 Press [ ] or [] until <AUTO DRAWER SELCT> appears press [OK].

OK

COMMON SETTINGS

 

AUTO DRAWER SELCT

 

6.AUTO DRAWER SELCT

 

1.COPY

 

 

 

 

The <AUTO DRAWER SELCT> menu appears.

Specifying Common Settings

5-23