1 Lift the feeder/platen cover.
Sensor
IMPORTANT
The machine is equipped with an open/close sensor on the feeder/platen cover (see circled area in the above illustration). When placing originals on the platen
glass, lift the feeder/platen cover high enough so that the open/close sensor underneath is fully released. Otherwise, the machine may not correctly detect the size of the originals. (Only the imageRUNNER 2020 can detect the size of an original placed on the platen glass.)
2 Place your originals face down.
The surface of the original that you want to copy must be placed face down. Align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner).
1
Basic Copying Features
Placing Originals |