2 to 2-Sided

This mode enables you to make two-sided copies from two-sided originals.

OriginalCopy

Two-Sided

OK

NOTE

If the Feeder (DADF-P1) is attached, it is recommended that you set the originals in the feeder when copying in 2 to 2-Sided mode. This enables you to automatically scan the front and back sides of the originals without the need to turn over and re-feed the originals.

1 Place your originals ➞press [Two-Sided].

If necessary, see the screen shot in step 2 of “1 to 2-Sided,” on p. 2-20.

2 Press [ ] or [] until ‘2 > 2-SIDED’ appears ➞ press [OK].

2

Special Copying Features

Two-Sided Copying

2-23