Two-Sided Copying
The Two-Sided mode enables you to make two-sided copies from one-sided or two-sided originals, or make one-sided copies from two-sided originals.
IMPORTANT
You may not be able to make two-sided copies on some types of paper, depending on the paper.
NOTE
• If you are copying in the Two-Sided mode, align the top edge of the original with the back edge of the platen glass (by the arrow in the top left corner), or with the back edge of the feeder.
• Paper used to make two-sided copies must conform to the following specifications: - Paper size: 11" ⋅ 17", LGL, LTR, LTRR, or STMTR
- Paper weight: 17 lb bond to 24 lb bond (64 g/m2 to 90 g/m2)
1 to 2-Sided
This mode enables you to make two-sided copies from one-sided originals.
OriginalsCopy
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and STMTR, horizontally. If these originals are placed vertically, the back side of the original is copied upside down.
