Different Size Originals

The Different Size Originals mode enables you to copy different size originals together.

IMPORTANT

If your machine is the imageRUNNER 2016, the Feeder (DADF-P1) should be attached to use this mode.

If paper of the same size as the original is not loaded in the paper drawer or stack bypass, the machine automatically reduces, enlarges, or separates the copied image to fit the paper loaded in the paper drawer or stack bypass.

The Different Size Originals mode cannot be used with the Two-Page Separation, 2 on 1 Combination, Original Frame Erase, Book Frame Erase, Binding Hole Erase, or Book to 2-Sided mode.

Make sure that the different size originals are of the same weight (paper type).

Set different size originals in the following combinations. Other combinations may damage the originals.

- 11" 17" and LGL, LTR and LGL, LTR and LTRR

Align the top edge of the originals with the back edge of the feeder or the platen glass if you are placing originals with different widths. (“Width” refers to the vertical measurement of the paper from the front of the machine to the back of the machine when the paper is placed in the feeder or the platen glass.)

If you place originals with different widths into the feeder, the originals may move slightly when fed to the platen glass. As a result, the images may be scanned and copied as slanted.

If the Different Size Originals mode is set, the scanning speed may be slower than normal.

If the Different Size Originals mode is set in combination with the Auto Paper Selection mode, Auto Orientation is not performed.

2

Special Copying Features

Different Size Originals

2-17