2 Neatly place your originals with the side to be copied face up into the original supply tray.
Place your originals as far into the feeder as they will go.
IMPORTANT
•Do not add or remove originals while they are being scanned.
•When scanning is complete, remove the originals from the original output area to avoid paper jams.
1
Basic Copying Features
Original Output Area
NOTE
•The scanned originals are output to the original output area in the order that they are fed into the feeder.
•When you are enlarging an LTR original onto 11'' ⋅ 17'' or LGL paper, place the original horizontally.
•You can place different size originals together into the feeder if you set the Different Size Originals mode. (See “Different Size Originals,” on p.
Placing Originals |