NOTE
•The default setting is the standard paper size set in the <PAPER SELECT> menu. (See “Paper Drawer Selection,” on p.
•You can activate or deactivate the Auto Paper Selection mode for each paper drawer and the stack bypass. (See Chapter 5, “Customizing Settings,” in the Reference Guide.)
•You can use the stack bypass for the Auto Paper Selection mode when:
-The paper is loaded in the stack bypass.
-The paper size is specified in <BYPASS STD SET> in the <COMMON SETTINGS> menu.
-The Auto Paper Selection mode is set to ‘ON’ for the stack bypass in <COPY> in <AUTO DRAWER SELCT> in the <COMMON SETTINGS> menu.
1 Place your originals.
Make sure that <AUTO> is displayed. If not, press 
(Reset) or press 
(Paper Select) repeatedly until <AUTO> appears on the LCD display.
<AUTO> and the size of the paper loaded in the paper drawer are automatically selected according to the detected original size, are displayed on the LCD display.
NOTE
If the message <NO APPROPRIATE SIZE> appears, the paper loaded in the paper drawers or stack bypass is different in size from the original. Load the paper of the appropriate size indicated on the LCD display into a paper drawer or the stack bypass. If you press 
(Start) without loading the paper, the machine automatically selects the paper with the narrowest margin, and starts copying.
Start
2 Press [Start].
Copying starts.
NOTE
If the machine cannot detect the size of the original, the paper size does not appear on the LCD display. In this case, specify the size of the original after pressing
(Start).
Press [
] or [
] to select the size ➞press 
(Start).
1
Basic Copying Features
Paper Selection |