NOTE

If there is no paper in the paper source that you have selected, a message prompting you to load the paper of the appropriate size appears on the LCD display. You cannot start copying until you load the paper or change the paper selection.

The paper sizes are displayed in the order in which they are loaded in the paper drawers.

The suffix ‘R’ (such as in LTRR), used in paper size designations, indicates that the paper is loaded in a paper drawer or the stack bypass horizontally.

If you have not specified the paper size and type for the stack bypass using the Additional Functions menu, a message prompting you to specify them appears on the LCD display when you select the stack bypass as the paper source. (See Chapter 5, “Customizing Settings,” in the Reference Guide.)

Start

3 Press [Start].

Copying starts.

NOTE

To cancel all settings and return the machine to the Standby display, press (Reset).

1

Basic Copying Features

Paper Selection

1-27