2

Special Copying Features

2 to 1-Sided

This mode automatically turns over two-sided originals placed in the feeder to make one-sided copies on different sheets of paper.

OriginalCopies

IMPORTANT

Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and STMTR, horizontally. If these originals are placed vertically, the back side of the original is copied upside down.

NOTE

If the Feeder (DADF-P1) is attached, it is recommended that you set the originals in the feeder when copying in 2 to1-Sided mode. This enables you to automatically scan the front and back sides of the originals without the need to turn over and re-feed the originals.

Two-Sided

1 Place your originals ➞press [Two-Sided].

 

If necessary, see the screen shot in step 2 of “1 to 2-Sided,” on p. 2-20.

2 Press [ ] or [] until ‘2 > 1-SIDED’ appears ➞ press [OK].

OK

2-26Two-Sided Copying