Canon 2812B015 Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)

1-7
1
1
Detailed Settings
Setting the Administrator Password, LAN, IPv6,
DNS, etc. (Network)
Administrator Password
(1) [Password]
Set the Administrator password. You can use up to eight (single-byte) ASCII characters
(space or printable characters). The factory setting is "VB-C60." If Admin Viewer or VBAdmin
Tools is connected, change the password after terminating the connection.
(2) [Confirm Password]
Enter the same password for confirmation.
You can set the following items.
zAdministrator Password
Set the Administrator password.
zLAN
Set the IP address and other items needed to establish LAN connection.
zIPv6
Set IPv6.
zDNS
Set the name server address, host name and DDNS.
zSNMP
Set the SNMP.
Note
zBe sure to change the default Administrator password to ensure security of the system.
Don't forget the new password.
zIf you have forgotten the Administrator Password, press the reset switch to initialize the
settings. See "Initializing with the Reset Switch on the Camera" ( P. 5-21). Take note,
however, that this will reset all settings of the camera, except for time and date, to their
factory settings.