Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet.

Keep the area around the power plug clear of objects so that the power cord can be disconnected easily in an emergency.

Use only the AC adapter provided with this device. Also, do not use the AC adapter provided with any other electrical devices.

Model: MG1-4314

If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information.

Moving the Device

When moving the device, always hold it with both hands to avoid dropping it. The weight of the device unit is approximately 7.9 lbs (3.6 kg).

Before moving the device, make sure the document tray is closed and the network cable and AC adapter are disconnected. If the device is transported with these items connected, the plugs and connectors may be damaged due to excessive force applied to them during movement.

Handling

WARNING

Note the following precautions whenever using the device. Failure to do so may result in a fire or electric shock.

Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the device.

Do not cut, damage, or modify the power cord or AC adapter. Do not place heavy objects on the power cord or AC adapter, and do not pull or excessively bend the power cord.

Never connect the power cord when your hands are wet.

Do not connect the device to a multiplug power strip.

Do not knot or coil the power cord, as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet.

Do not use power cords and AC adapters other than the power cord and AC adapter provided with this device.

Never try to take the device apart or modify it in any way.

Never try to take the AC adapter apart or modify it in any way, as this is dangerous and may lead to a fire or electric shock.

Do not use flammable aerosol sprays near the device.

When cleaning the device, turn the power OFF and disconnect the power cord from the power supply.

Clean the device using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.

If the device makes strange noises, or gives off, smoke, heat, or strange odors, or the device does not function or other abnormalities occur when you use the machine, immediately turn the power OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information.

6