10. Preparing the Device
When placing a document in the device, pull out the document feed tray so that it matches the size of the document, and then move the feed selection lever to the appropriate position for the desired feed method (Page Separation ON or OFF) for the document.
❏Preparing the Document Feed Tray and Eject Tray
Prepare the trays in accordance with the type of document.
1.Open the document feed tray a.
2.Open the document eject tray b.
Hint
If the output documents curl in the eject tray when scanning particularly thin documents, remove the eject tray.
To remove the document eject tray, push in on the illustrated portions of the tray on both sides in the direction of the arrows a and pull out b.
Hint | To reattach the eject tray, insert the protrusions on both sides of | |
Open the center tray extension when output documents are | ||
the tray into the holes on the device. | ||
|
likely to fall out of the tray.
After connecting the tray, make sure that it is attached securely.
27