❏About the Fingerprint Sensor (ScanFront 300eP only)
●The following actions may damage the sensor or cause it to malfunction:
–Dropping an object on the fingerprint sensor, or otherwise subjecting it to a strong impact
–Scratching the surface of the fingerprint sensor, or poking it with a pointed object
–Pressing a hard object such as a fingernail or metal item against the fingerprint sensor
–Touching the fingerprint sensor with dirty hands
–Placing a sticker on the surface of the fingerprint sensor, or covering the surface with ink or another substance
●If fingerprint authentication fails frequently, the fingerprint sensor may be dirty. Clean the surface of the fingerprint sensor regulary.
●When cleaning the fingerprint sensor, use a soft dry cloth to wipe dirt off the surface.
●Do not use a pointed object to remove any dirt that accumulates around the fingerprint sensor. Doing so may cause the fingerprint sensor to malfunction.
●Touching the fingerprint sensor while charged with static electricity may cause the fingerprint sensor or device unit to malfunction. Before touching the fingerprint sensor, discharge any static electricity by touching a piece of metal. Be especially careful during dry periods, such as the winter season, when the likelihood of being charged with static electricity is high.
❏Disposal
●Prior to disposing of the device, initialize the device to ensure that the registered data is deleted.
●When disposing of the device, make sure to follow all local ordinances and laws or consult with the retailer who sold you the device.
8