7. Establishing the Connection between the Device and ShareScan Administration Console
In order to use the device, you must first install ShareScan Administration Console on a computer that is connected to the same network as the device.
This section describes the procedure for installing ShareScan Administration Console on the computer and establishing a connection with the device.
❏System Requirements
The minimum requirements for installing ShareScan Administration Console on your computer are as follows.
CPU
Dual core or higher
RAM
2GB or higher
Operating System
For details on supported operating systems, refer to the release notes stored as a PDF file on the eCopy ShareScan 5.0 Setup
Hard disk
Type and format
IDE or SCSI drive (NTFS format is required)
Capacity
40GB or higher
Network
100
Required components
TCP/IP and Client for Microsoft Networks
IMPORTANT
Depending on how the device is used, a system with higher specifications may be required. For details, refer to the eCopy ShareScan 5.0 Installation Guide (electronic manual).
❏Installing ShareScan Administration Console
Install ShareScan Administration Console (and other necessary software) on the computer.
IMPORTANT
We recommend installing ShareScan Administration Console on a computer that has a static IP address assigned.
1.Start the ShareScan Administration Console installer provided by your dealer at the time of purchase.
The [Launch] window appears.
2.Select the language.
18