7.Start the device search.
The device search is performed using the default setting for [Discovery] (i.e., [UDP]). If no devices are found, change the [Discovery] setting and perform the search again.
If you set [Discovery] to [SNMP], click [Refresh].
You can also perform searches by specifying the device IP address in [Device Name/IP] or [IP Range]. To do so, click
for the corresponding list box.
If you click 
for [IP Range], a confirmation message for the search range appears. Click the [Yes] button.
Device search starts, and a list of discovered devices appears on the screen.
8.Select the check box for the device you want to add, and click [OK].
The device registration screen appears.
9.Configure the device registration settings.
[Password]
Enter the password specified on the ScanFront.
[Device Settings]
The [Use HTTPS] option is enabled by default. You can disable this option to enter a port number of your choice in the [Port] box.
10.Click the [Register] button.
The screen for specifying the device name appears.
11.Specify the device name.
•To specify a new device name, enable [New name] and enter the new name in the text box.
•To use the current device name, enable [Existing name].
12.Click the [OK] button.
The device is added. The following Home screen appears on the LCD of the added device.
24