You should now be able to access the device from the computer on which ShareScan Administration Console is installed.
5.Click [Add Device] located in the [Devices] section of the ribbon.
The device search screen appears.
6.Specify the search conditions.
Specify the search conditions with the following settings.
[Discovery]
Specify the network protocol used for the device connection.
[Vendor]
When [Discovery] is set to [TCP/IP], specify the manufacturer of the device here (e.g., “ScanFront” for this device).
[Device Name/IP]
Specify the device name or IP address configured for the device.
[IP Range]
Specify an IP address range.
23