2. Names and Functions of Parts
The names and functions of the parts of the ScanFront 300e/300eP are shown below.
❏Front and Document Feed and Eject Trays
a Tray Extension
Open this to prevent scanned documents from slipping off.
b Document Eject Tray
Open this tray when using the ScanFront. If scanned documents curl in the document eject tray, remove the entire tray.
c Panel Unit
d Touch Panel
Touch this screen to operate the ScanFront.
e Lock Lever
Locks the panel unit. Pull the lever toward you to unlock the panel unit.
f Document Guides
Adjust these to match the width of the document.
g Document Feed Tray
Place documents here.
h USB Port (Front)
Connect a
i Power Switch
Use this to turn the power ON.
*Use the Power OFF button on the touch panel to turn the power OFF.
j Feed Selection Lever
Use this lever to change the feed method for documents.
k Power Indicator
Lights when the power is ON.
l Fingerprint Authentication Sensor (Only Available with the ScanFront 300eP)
This fingerprint sensor is for fingerprint registration and authentication. (See p. 33.)
Open this when there is a paper jam or to perform maintenance.
9