3Auto Exposure BracketingN

Canceling AEB

Follow steps 1 and 2 to turn off the AEB level display.

The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recycling is completed, etc.

Shooting Tips

Using AEB with continuous shooting

If <i> continuous shooting (p.101) is set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: standard exposure, decreased exposure, and increased exposure.

Using AEB with <u> single shooting

Press the shutter button three times to take the three bracketed shots. The three bracketed shots will be exposed in the following sequence: standard exposure, decreased exposure, and increased exposure.

Using AEB with the self-timer or a remote controller (sold separately)

With the self-timer or a remote control shooting (<Q> or <l>), you can take three continuous shots after a 10-sec. or 2-sec. delay. With <q> (p.103) set, the number of continuous shots will be three times the number set.

AEB cannot be used with flash, [Multi Shot Noise Reduction], or bulb exposures.

If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other than [Disable], the AEB’s effect may be minimal.

120