Canon ISO 100 cannot be set, ISO speed [H] (ISO 25600) cannot be set, The Auto Lighting Optimizer cannot be set

Troubleshooting Guide

The maximum burst during continuous shooting is lower.

With ISO 12800 or “H” (equivalent to ISO 25600), the maximum burst for continuous shooting will greatly decrease (p.91).

Set [z3: High ISO speed NR] to [Standard/Low/Disable]. If it is set to [High] or if [Multi Shot Noise Reduction] is set, the maximum burst during continuous shooting will greatly decrease (p.124).

With [Chromatic aberration: Enable], the maximum burst for continuous shooting will greatly decrease (p.128).

During WB bracketing, the maximum burst for continuous shooting will decrease (p.138).

If you shoot something that has fine detail (such as a field of grass), the file size will be larger and the actual maximum burst may be lower than the number mentioned on page 87.

ISO 100 cannot be set.

Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority]

is set to [1: Enable], ISO 100 cannot be set. If [0: Disable] is set, ISO 100 can be set (p.295). This also applies to movie shooting (p.174).

ISO speed [H] (ISO 25600) cannot be set.

Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority]

is set to [1: Enable], the [H] ISO speed (25600) cannot be selected

even when [2: ISO expansion] is set to [1: On]. If [0: Disable] is set

for [3: Highlight tone priority], [H] can be set (p.294).

The Auto Lighting Optimizer cannot be set.

Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority]

is set to [1: Enable], the Auto Lighting Optimizer cannot be set. If [0: Disable] is set, the Auto Lighting Optimizer can be set (p.295).

323