Handy Features

Text Entry Procedure

Changing the entry area: Press the <Q> button to toggle between the top and bottom entry areas.

Moving the cursor:

Press the <U> key to move the cursor.

Entering text:

In the bottom area, press the <S> key or turn the <6> dial to select a character, then press <0> to enter it.

Changing the entry mode:*

Select [ ] at the bottom right of the bottom entry area. Each time you press <0>, the entry mode will change as follows: Lower case → Numerals / Symbols 1 → Numerals / Symbols 2 → Upper case.

*When [Touch control: Disable] is set, you can display all the available characters on one screen.

Deleting a character:

Press the <L> button to delete one character.

Exiting:

Press the <M> button, check the text, select [OK], then press <0>. The screen in step 2 will reappear.

Canceling the text entry:

Press the <M> button, check the text, select [OK], then press <0>. The screen in step 2 will reappear.

You can also set or check the copyright information with EOS Utility (provided software, p.350).

207