Using Eye-Fi Cards

With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN.

The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card’s manufacturer.

The camera is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in your area, please check with the card manufacturer.

1

2

Insert an Eye-Fi card (p.31).Select [Eye-Fi settings].

Under the [51] tab, select [Eye-Fi settings], then press <0>.

This menu is displayed only when an Eye-Fi card is inserted into the camera.

3 Enable Eye-Fi transmission. Press <0>, set [Eye-Fi trans.] to [Enable], then press <0>.

If you set [Disable], automatic transmission will not occur even with the Eye-Fi card inserted (transmission status icon I).

4Display the connection information.

Select [Connection info.], then press <0>.

307