Canon SSelecting the AF PointN, Select the AF point, 3 Focus the subject, Press the <S> button. (9)

SSelecting the AF PointN

In Basic Zone modes, the camera will normally focus the closest subject automatically. Therefore, it may not always focus your target subject. In the <d>, <s>, <f>, and <a> modes, you can select the AF point and use it to focus the target subject.

1

2

Press the <S> button. (9)

XThe selected AF point will be displayed on the LCD monitor and in the viewfinder.

Select the AF point.

Use the <S> key to select the AF point.

While looking at the viewfinder, you can select the AF point by turning the <6> dial until the desired AF point lights up in red.

When all the AF points light up, automatic AF point selection will be set. The AF point will be selected automatically to focus the subject. Pressing <0> toggles the AF point selection between the center AF point and automatic AF point selection.

3 Focus the subject.

Aim the selected AF point over the subject and press the shutter button halfway to focus.

You can also tap the screen to select AF points. During manual AF point

selection, tapping the [ ] icon at the bottom left of the screen will switch to automatic AF point selection.

97