Canon 7585 Picture Image, Image Adjustment, Color Selection Mode, Note, Contrast, Brightness

Picture Image

Image Adjustment

1Press the MENU button to display the On-Screen Menu. Use the Point  buttons to move the red frame pointer to the Image Adjust Menu icon.

2Use the Point ! buttons to move the red frame pointer to the desired item and then press the OK button to display the

adjustment dialog box. Use the Point  buttons to adjust the setting value.

Contrast

Press the Point  button to decrease contrast; press the Point button to increase the contrast (from 0 to 63).

Brightness

Press the Point  button to decrease the brightness; press the Point button to increase the brightness (from 0 to 63).

Color =

Press the Point  button to decrease the intensity of the color; press the Point button to increase the intensity of the color (from 0 to 63).

Tint =

Press the Point  buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1Use the Point ! buttons to move the red frame pointer to Color Management, and then press the OK button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears.

2Use the Point !  buttons to move the pointer to the spot where you want to adjust the color and then press the OK button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color.

3Use the Point !  buttons to adjust the LEVEL and PHASE of the color, and then press the OK button to confirm

the setting. Then use the Point ! buttons to adjust the GAMMA for the color and press the OK button to accept the setting. After adjusting, press the OK button to go to the

COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

LIST

Go to the COLOR MANAGEMENT LIST.

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press OK button.

Use the Point  buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT

POINTER

Note:

•= Displayed only in Video Input.

•Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41).

45