Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up.
Note:
• When the image is top/bottom and left/right reversed, set the ceiling function to “On.” (pp. 40, 44)
Positioning Precautions
Avoid positioning the projector as described below when installing.
10˚
10˚ | Do not tilt the projector more than | |
|
| 10 degrees from side to side. |
|
| |
|
|
|
10˚ |
| |
Do not put the projector on either side to project an image.
10˚
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
10˚
10˚
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non- recommened ceiling mount kit or installation of the ceiling mount kit in an improper location.
7
