Video Input, Video System Selection | Canon 7585 instruction

Video Input

Video System Selection

1Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon.

2Use the Point ! buttons to move the red arrow pointer to the desired system and then press the OK button.

Video Jack or S-Video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV System Menu icon

The selected system is displayed

Move the pointer to the desired system and press the OK button.

Y, Pb/Cb, Pr/Cr Jacks

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

When the Video System is 1035i or 1080i, select the system manually.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV System Menu icon

The selected system is displayed.

Move the pointer to the desired system and press the OK button.

41

Image 41

Canon 7585 manual Video Input, Video System Selection, Video Jack or S-Video Jack, Pb/Cb, Pr/Cr Jacks

Contents

8VHU·V0DQXDO Features and Design Table of Contents Risk of Electric Shock Do not Open To The Owner Safety Instructions Top Panel Air Circulation Positioning Precautions Installing the Projector in Proper Directions Transporting the Projector Moving the Projector Compliance AC Power Cord for the United States and CanadaFederal Communications Commission Notice Canadian Radio Interference Regulations Front Back Part Names and FunctionsBottom Top Cover Release Button Lens Cap Reset button USB Connector Series BRear Terminal INFRARED Remote Receiver Back Indicators on the top panel Side Control and Indicators Remote Control Unit FOCUS buttons Adjust the focus p.28 BLANK button P-TIMER buttonMENU button D-ZOOM button Wired Remote Control Transmitter Remote Control Battery InstallationRemote Control Receivers and Operating Range Remote Control Code Positioning the Projector InstallationAdjustable Feet Removing the lens Lens Installation Attaching the lens to the projector DVI-Digital Cable = USB Cable BNC Cable = Connecting to a Computer Digital and Analog RGB Monitor Out Signal Table Connecting to Video Equipment Video, S-Video For the U.S.A. and Canada For Continental Europe Connecting the AC Power CordFor the U.K Basic Operation What is PIN code?Turning On the Projector Enter a PIN code Turning Off the Projector Remote Control Unit How to Operate the On-Screen MenuSide Control On-Screen Menu Menu Bar Focus Adjustment Zoom AdjustmentLens Shift Adjustment Operating with Projector Control Operating with Remote Control Unit Filter button Timer buttonBlank button Mouse Pointer button Pointer Wireless Mouse OperationPointer Function Remote Control button operation Remote Control OperationInput Selection Input Menu Operation Computer Input Source SelectionInput Menu Source Select Menu Video Input Source Selection When Selecting Input 3 AV Terminals Computer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System Manually PC Adjust Menu Auto PC AdjustmentDirect Operation Auto PC adj Manual PC Adjustment Mode free To clear the adjusted data ResetTo store the adjusted data Store Standard Image Level SelectionHigh contrast Custom Screen Menu Screen Size Adjustment Ceiling KeystoneRear Digital zoom + Video System Selection Video InputVideo Jack or S-Video Jack Pb/Cb, Pr/Cr Jacks Cinema Provide the image at the normal video aspect ratio Keystone Image Adjust Menu Image AdjustmentPointer Mode Picture Image Menu Color MList Color M Menu Color Palette Offset Red/Green/Blue White balance Red/Green/BlueSharpness Gamma Setting Setting Logo Capture LogoLogo select Change the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code RC sensor USB Security Security Key lockPIN code lock Change the PIN Code Change the PIN Code Lock setting Test pattern Factory defaultFilter counter Filter Instructions Maintenance and Care Replacing the Filter Cartridge Reset the filter counter and the scroll counter p.58 Resetting the Scroll Counter Resetting the Filter CounterFilter counter Scroll counter Lamp Replace indicator Lamp ReplacementReset the Lamp counter p.60 Top Panel Order Replacement Lamp Resetting the Lamp Counter Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection Lens Then check the matters below Lamp indicator lights on and other four indicators blink Appendix Troubleshooting Wireless mouse Remote control unitDoes not work Function does not Menu Tree Image AdjustComputer Input/Video Input Information System PC AdjustImage Select Screen USB Setting Projector is detecting abnormal condition Indicators and Projector ConditionProjector is operating normally Appendix Indicators Resolution Compatible Computer Specifications 59.940 Signal Compatibility Panel ResolutionPower Accessories To the sales and service engineers Lens ReplacementOptional Parts PJ Link Notice USB Connector Series B Configurations of TerminalsControl Port Connector D-sub 9 pin ANALOG/ Monitor OUT Mini D-sub 15 pin While the projector is locked with the PIN code Dimensions Example Serial Control InterfaceOperation Format Functional Execution Command CR0 Status Read Command Canon Italia S.p.A Canon Deutschland GmbHCanon Schweiz A.G Canon GmbH