zMenu Function Settings

Silent shootingN

Mode 1

The shooting operation noise is quieter than the normal shooting. Continuous shooting is also possible. High-speed continuous shooting will be approx. 7.0 fps.

Mode 2

When you press the shutter button completely, only one shot will be taken. While you keep holding down the shutter button, the camera operation will be suspended. Then when you return to the shutter button’s halfway position, the camera operation will resume. The shooting noise is thereby minimized. Even if continuous shooting is set, only a single shot can be taken in this mode.

Disable

If you use a TS-E lens to make vertical shift movements or use an Extension Tube, be sure to set this to [Disable]. Setting it to [Mode 1] or [Mode 2] will result in incorrect or irregular exposures.

When you press the shutter button completely, the shutter will sound like it took two shots. However, only one shot will be taken.

If you use flash, the [Disable] operation will take effect even if you had set it to [Mode 1] or [Mode 2].

When using a non-Canon flash unit, set it to [Disable]. (If [Mode 1] or [Mode 2] is set, the flash will not fire.)

Metering timerN

You can change the display time of the exposure setting.

If you select [yDust Delete Data], [6Sensor cleaning], [7Clear all camera settings], or [7Firmware Ver.], the Live View shooting will be terminated.

141