Remove the battery.
Take off the battery holder.
Replace the battery.
Make sure the battery is in the proper + – orientation.

Replacing the Date/Time Battery

The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If you turn on the power and the date/ time is reset, replace the back-up battery with a new CR1616 lithium battery as described below.

The date/time/zone setting will be reset, so be sure to set the correct date/time/zone (p.43).

1Set the power switch to <2>.

2

3

(+) (–)4

5 Insert the battery holder.

Then load the battery and close the

cover.

For the date/time battery, be sure to use a CR1616 lithium battery.

251