Before You Start
4Set the daylight saving time.
Set if necessary.
Turn the <5> dial to select [Y]. Press <0> so <r> is displayed. Turn the <5> dial to select [Z], then press <0>.
When the daylight saving time is set to [Z], the time set in step 2 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour.
5 Exit the setting.
Turn the <5> dial to select [OK], then press <0>.
XThe Date/Time/Zone will be set and the menu will reappear.
When Updating Firmware 1.x.x to 2.x.x:
When you update the firmware from version 1.x.x to 2.x.x, the “Date/Time” will be reset. You will have to set the “Date/Time/Zone” again.
The menu setting procedure is explained on pages
The date/time that was set will start from when you press <0> in step 5. In step 3, the time displayed on the upper right is the time difference compared with UTC (Coordinated Universal Time). If you do not see your time zone, set the time zone while referring to the difference with UTC.
44