Installing and Removing the Battery

Installing the Battery

Load a fully charged Battery Pack LP-E6 into the camera. The camera’s viewfinder will become bright when a battery is installed, and darken when the battery is removed.

1Open the battery compartment cover.

Slide the lever as shown by the arrow and open the cover.

2 Insert the battery.

Insert the end with the battery contacts.

Insert the battery until it locks in place.

3 Close the cover.

Press the cover to close it.

Only the Battery Pack LP-E6 can be used.

Removing the Battery

Open the cover and remove the battery.

Press the battery release lever as shown by the arrow and remove the battery. To prevent short circuiting, be sure to attach the protective cover to the battery.

26