SSelecting the AF AreaN

Selecting the AF Area Selection Mode

Select the AF area selection mode.

Press the <S> button. (9) Look through the viewfinder and press the <B> button.

X Press the <B> button to change the AF area selection mode.

By default, the button changes the mode to single-point AF, Zone AF, and 19-point AF.

Selecting the AF Point Manually

1 Press the <S> button. (9)

X The 19 AF points will be displayed in

the viewfinder.

If Zone AF has been set, the selected zone will also be displayed.

2 Select the AF point.

The AF point selection will change in the direction you tilt the <9>. If you press <9> straight down, the center AF point (or zone) will be selected.

You can also use the <6> and

<5> dials to select the AF point. The <6> dial selects an AF point in the horizontal direction, and the <5> dial selects an AF point in the vertical direction.

With [8C.Fn III -7: Manual AF pt. selec. pattern], you can set either [0:

Stops at AF area edges] or [1: Continuous] (p.228).

92