Using AF to Focus

Live Mode and u(Face Detection) Live Mode Notes

AF operation

Focusing will take slightly longer.

Even when focus has been achieved, pressing the shutter button halfway will focus again.

The image brightness may change during and after the AF operation.

If the light source changes while the Live View image is displayed, the screen might flicker and focusing can be difficult. If this happens, stop the Live View shooting and autofocus under the actual light source first.

If you press the <u> button in the Live mode, the AF point area will be magnified. If it is difficult to focus in the magnified view, return to the normal view and autofocus. Note that the AF speed may differ between the normal and magnified views.

If you autofocus in the Live mode’s normal view and then magnify the image, the focus might be off.

In the uLive mode, pressing the <u> button will not magnify the image.

In the Live mode or u(face detection) Live mode, if you shoot a peripheral subject and the target subject is slightly out of focus, aim the center AF point over the subject to focus, then take the picture.

The AF-assist beam will not be emitted.

145