Canon 802.11g 54M WLAN ‧ Netscape, Step Obtain IP Settings from Your Router, ．Windows NT/2000/XP

802.11g 4-Port Wireless LAN Broadband Router

4. Click “OK”, and then click “OK” again to close the “Internet Options” window.

‧Netscape

1.Open Netscape and click the stop button. Click “Edit”, then click “Preferences…”

2.In the “Preferences” window, under “Category” double-click “Advanced”, then click “Proxies”. Select “Direct connection to the Internet.” Click “OK”.

Step. 3 Obtain IP Settings from Your Router

1.Click “Start”, then “Run…”. Type “winipcfg” to open the IP Configuration utility.

2.Click the “Release All” button.

3.Click the “Renew All” button

4.Verify that your IP address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0

and your Default Gateway is 192.168. 1.1. Click “OK” to close the “IP Configuration” window.

．Windows NT/2000/XP

Step 1. TCP/IP Configuration

After you have completed the hardware setup by connecting your devices, you need to configure your computer to connect to your Router.

1.From the Windows desktop, click the “Start” button. Choose “Settings”, then click “Control Panel”.

2.From “Control Panel”, double-click the “Network & Dial-Up Connections” icon.

3.Double-click the icon that corresponds to the connection to your router.

4.Click “Properties” and double-click“Internet Protocol (TCP/IP)”.

5.On the “Internet Protocol (TCP/IP) Properties” dialog box, make sure “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected. If not, select them and click “OK” and close window.

Step. 2 Disable HTTP Proxy

‧Internet Explorer

12