Raise the paper rest, lower and pull out the paper output tray.
Slide the paper guide completely to the left.

Loading Glossy Photo Cards FM - 101

1. Raise the paper thickness lever to the mark.

2.

3.

4. With its glossy side facing up, place one Glossy Photo Card on top of the Loading Support Sheet <A> provided with the pack of Glossy Photo Cards and align both sheets.

Make sure that the Loading Support Sheet <A> is pointing down in the direction of the arrow.

To avoid jamming, never load a Glossy Photo Card

Memo

that is curled or bent, and confirm that the edges of the

 

card and the Loading Support Sheet are aligned

 

before setting them in the printer.

5. Align the stack with the right side of the sheet feeder and insert it into the printer.

6. Slide the paper guide to the left edge of the stack.

• To prevent a paper jam, make sure the sheets are

Caution

straight and flat in the sheet feeder.

Handle media carefully by the edges. Never touch the print surface of the sheets. Dirt or fingerprints on the print surface will adversely affect print quality.

• You can load only 1 Glossy Photo Card in the sheet

Memo feeder.

Loading Support Sheet

Glossy side

46

Page 47
Image 47
Canon 8200 manual Loading Glossy Photo Cards FM