Canon 8200 manual Click Print head deep cleaning icon

A printout is unclear, faded

Macintosh

1. Make sure the printer is switched on.

2. In the software application, from the File menu, select Page Setup.

•	The procedure you use to open the printer driver may
Memo	differ slightly, depending on the software application
	that you are using.

ON

Click!

3.	Click the Utilities button.
4.
	Make sure the Print Head Cleaning panel is displayed.
5.
	Click the	(Print head deep cleaning) icon.	Click!

•	You can also execute print head deep cleaning with
Memo	the printer control panel. Press and hold down the
	RESUME button until you hear two beeps and release.

6. Read the message and click the OK button.

•Print head deep cleaning begins and the POWER/ERROR lamp flashes for 1 minute until deep cleaning is completed. Wait for the POWER/ERROR lamp to stop flashing. When the POWER/ERROR lamp lights and remains on, you can resume printing.

7.Print a nozzle check pattern to check the results of the print head deep cleaning.

•After executing print head cleaning five times, and print head deep cleaning, if the results of the nozzle check pattern are still not satisfactory, the BJ Print Head may be damaged or worn out. Replace the BJ Print Head.

Click!

ABCDE

F

Reference

• Printing a nozzle check pattern (P.68)

• Replacing the BJ Print Head (P.77)

Troubleshooting

73