Canon 8200 manual Loading Envelopes, Slide the paper guide to left edge of the stack

Loading Paper and Special Print Media

Loading Envelopes

1. Lower the paper thickness lever to the mark.

2. Lower and pull out the paper output tray.

3. Prepare the envelopes for loading in the sheet feeder.

Caution

• Make sure that none of the flaps are overlapping.

• If the edges of the envelopes are not sharp, crease them with the side of a pen or biro.

• Press down on the corners and sides of the envelopes to make them as flat as possible by expelling all the air inside the envelopes.

•To avoid paper jams, make sure the envelopes are flat before you load them in the sheet feeder.

4.Slide the paper feed guide completely to the left.

5. With the return address facing up and pointed down, align the stack with the right side of the sheet feeder and insert the stack in the printer.

•	You can load up to 10 standard European DL or U.S.
Memo	Commercial No. 10 envelopes in the sheet feeder.

• Do not allow more than 10 envelopes to stack on the paper output tray

6. Slide the paper guide to left edge of the stack.

Loading Paper and Special Print Media

47