2 Cleaning the print head

The print head nozzles could be clogged if there is a pattern missing on the nozzle check pattern. Try cleaning the print head. If cleaning does not work, consider that ink has run out and replace the ink tank. If there is still sufficient ink remaining, then execute print head deep cleaning.

Memo • Print head cleaning and deep cleaning consume ink. Avoid cleaning the print head unnecessarily.

Windows

1.

Make sure the printer is switched on.

 

2.

 

Click the Start button, point to Settings, and click

 

Printers.

 

 

3.

 

Right-click the Canon BJC-8200icon and select

 

Properties.

 

4.

 

 

Click the Maintenance tab then click the

(Print

 

Head Cleaning) icon.

 

 

Memo

• To start print head cleaning with the printer operation

 

panel, press down and hold the RESUME button until

you hear one beep then release it.

5. Read the message and click the OK button.

6. Read the message and click the OK button.

The BJ Status Monitor opens automatically and closes when print head cleaning is completed.

The POWER/ERROR lamp flashes green for about 30 seconds until print head cleaning is completed. Wait for the POWER/ERROR lamp to stop flashing.

ON

Click!

Click!

Click!

7. Print a nozzle check pattern to check the results of the print head cleaning.

If there is no change after cleaning, use the BJ Status Monitor to check the amount of ink remaining, or visually check the ink levels of the ink tanks.

1If an ink tank is empty, replace it.

2If there is sufficient ink, execute print head deep cleaning.

If the printer is not used for a long period, it may not print normally and even up to 5 print head cleanings may not solve the problem. If this problem occurs, try to clean the print head with print head deep cleaning.

Reference

• Printing a nozzle check pattern (P.68)

• Deep cleaning the print head (P.72)

• Replacing an ink tank (P.74)

70

Page 71
Image 71
Canon 8200 manual Cleaning the print head, Read the message and click the OK button