Canon CP-100 manual Remove the ink cassette

Problem	Cause	Correction
The printer’s indicator glows red	There is a malfunction in the	Remove the paper from the
without the camera’s LCD	printer.	paper handling slot and take up
monitor displaying any error		any slack in the ink sheet. Press
message.		the ON/OFF button until the
		indicator’s light turns off and
		press it again until the printer
		turns on.
Print quality is not good.	You are not using the correct	Use the designated paper type.
	paper type.
	Paper is loaded wrong-side up.	Load the paper correctly (glossy
		side up).
	The ink sheet or paper is dirty.	Use a clean ink sheet and clean
		paper.
	Condensation has formed within	Wait for condensation to
	the printer.	evaporate.
Faint stripes appear in the print.	Dust has accumulated inside the	Remove the ink cassette and
	printer.	insert the cleaner in the direction
		of the arrow and with the arrow
		facing up.
		Push it in completely as shown in
		figure A and slide it in and out of
		the printer 2 or 3 times.
Printed images are distorted.	The printer is too close to a TV,	Move the printer so that it is at
	video game machine, or other	least one meter (3.3 ft.) away
	electromagnetic source.	from the electromagnetic source.
	The printer is too close to a	Move the printer away from the
	stereo speaker, large motor, or	strong magnetic source.
	other strong magnetic source.
Nothing happens when the	The printer has overheated.	Wait for the printer to cool down.
camera’s SET button is pressed.
	Printing is in progress.	Wait for the printer to finish
		printing.
Frequent paper jams.	The paper cassette is	Do not load more than 18 sheets
	overloaded.	of paper into the cassette.
	The print output receptacle is too	Do not allow more than 9 sheets
	full.	to accumulate in the receptacle.
	Paper is creased or curled.	Do not use paper that is creased
		or curled.

A

30