Canon D680, D661 Setting the Energy Saver Mode Manually, Restoring from the Energy Saver Mode

Energy Saver Mode

This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode.

• The time until the machine enters the energy saver mode can be specified in the range from 3 minutes

NOTE to 30 minutes. You can also turn off the energy saver function. (→ p. 7-4)

•The energy saver function does not activate when the machine is in the following status:

–When printing out copies or faxes* or other pages

–When sending or receiving faxes*

–While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up*

–When paper jams occur

–When the platen unit is not returned to the original position

–When an error code appears and the Alarm indicator flashes

–When PRESS SET KEY is displayed

* Only for the imageCLASS D680 model

Setting the Energy Saver Mode Manually

1Press Energy Saver.

• The LCD is turned off and the Energy Saver key lights up.

• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait

NOTE about 5 seconds before pressing Energy Saver.

Restoring from the Energy Saver Mode

1Press Energy Saver.

• The Energy Saver key goes off and the machine enters standby mode.

• The machine can be restored from the energy saver mode immediately. However, it may vary according

NOTE to room temperature and circumstances.

1-8