![](/images/new-backgrounds/1103684/10368449x1.webp)
Problem Documents
•Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen glass or loading it into the ADF.
•Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF.
•To prevent document jams in the ADF, do not use any of the following:
Wrinkled or creased paper | Curled or rolled paper | Torn paper |
Carbon paper or carbon- | Coated paper | Onion skin or thin paper |
backed paper |
|
|
![](/images/new-backgrounds/1103684/10368449xi2.webp)
Scanned Area of a Document
The shaded area in the illustration below shows the scanned area of a document. Make sure your document’s text and graphics are within this area.
• The scanning limit of documents set on the platen glass will differ depending on the MAX. SCAN
NOTE | LENGTH of 330 mm or 356 mm specified in COPY | SETTINGS of the Additional Functions. | ||||||||||||||
| ||||||||||||||||
|
| MAX. 0.16” | MAX. 0.08” | |||||||||||||
|
| (MAX. 4.0 mm) | (MAX. 2.0 mm) | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCANNING DIRECTION
Letter/Legal
MAX. 0.08” (MAX. 2.0 mm)
MAX. 0.08” (MAX. 2.0 mm)