![](/images/new-backgrounds/1103684/10368463x1.webp)
![](/images/new-backgrounds/1103684/10368463xi2.webp)
Making Multiple Copies
You can make multiple copies.
1Use the numeric keys to enter the number of copies you want.
100% | LTR | 05 |
Ex: | TEXT |
•The LCD displays the number of copies you entered.
• You can make up to 99 copies.
• You can reserve the next copy job while the NOTE machine is outputting copies. (→ p.
•The LCD keeps on displaying the specified number of copies until copying finishes. When the auto clear function activates, the LCD returns to standby display and the number of copies returns to 01 (factory default setting).
Selecting the Paper Feeding Location (Cassette or
When making copies on paper which cannot be loaded in the cassette, such as thick paper, transparencies, labels, envelopes, tracing paper, etc., you can use the
|
|
| • The settings changed in the Additional Functions are not returned automatically to the settings you set | ||||||
| NOTE |
|
| previously. Change to the previous settings again if necessary. | |||||
| Press Paper Select to select the paper |
| |||||||
1 | • When making copies on | ||||||||
| feeding location (cassette or | NOTE after having continuously copied on paper | |||||||
| tray). |
|
|
|
|
|
| smaller than | |
|
|
|
|
|
|
|
|
| may be dirty. To prevent copies from being |
|
| 100% TRAY A# | A4 | 01 |
| dirty, wait about one minute before making | |||
| Ex: |
|
|
| TEXT |
|
| copies. | |
|
|
|
|
|
| ||||
| A:If you select a paper type other than PLAIN | • When making copies of a small size or | |||||||
| thick paper*, etc., the copy speed may be | ||||||||
| PAPER in MP PAPERTYPE. (→ p. | ||||||||
| slightly slower than usual. | ||||||||
| #:If you set HIGH COPY | MODE to ON. (→ p. | |||||||
| * The paper type should be selected in the | ||||||||
|
|
|
|
|
|
|
|
|
Additional Functions.
• If you intend to make a copy and print with a thermal transfer printer on one sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a paper jam.
• When copying onto transparencies, remove each transparency from the output tray as it is output.
■Specifying the Paper Size
At the factory the paper size has already been set to FREE SIZE. Normally, you can make copies in this setting. However, when the copy images or the back of the paper is dirty, you can prevent the paper from getting dirty by specifying the paper size according to the following.
• To set the Additional Functions, see “Accessing the Additional Functions”. (→ p.
NOTE
–To specify the paper size every time you load the paper: Press Additional Functions, then select:
COMMON SETTINGS, MP TRAY PAPERSIZE, OFF
Then choose SET ON LOADING.
4
Making Copies