
Using the
yFlash Exposure CompensationN
In the same way as normal exposure compensation, you can set exposure compensation for flash. You can set flash exposure compensation up to ±2 stops in
1Select [Flash exp comp].
¡Select the [m] tab.
¡Press the <V> key to select [Flash exp comp], then press <0>.
2Set the flash exposure compensation amount.
¡Press the <U> key to set the desired amount, then press <0>.
Standard exposure index
Exposure level mark
DecreasedIncreased
exposureexposure
¡To cancel the flash exposure compensation, set the flash exposure compensation amount back to <E>.
¡ When you press the shutter button halfway, the <y> icon will be displayed in the viewfinder and on the LCD panel.
3Take the picture.
¡ The flash exposure compensation amount will remain in effect even after you turn the power switch to <2>.
¡The procedure is the same with
100