Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center.
Power Source
The battery cannot be recharged.
¡You are using the wrong battery. s Use Battery Pack
¡The battery pack is not properly attached to the battery charger. s Attach the battery pack properly to the charger. (p.20)
The camera does not operate even when the power switch is set to <1>.
¡The battery is exhausted.
sRecharge the battery pack. (p.20)
¡The battery is not installed properly. s Install the battery properly. (p.22)
¡Battery compartment cover is not closed.
sClose the battery compartment cover securely. (p.22)
¡ CF card slot cover is not closed.
sClose the CF card slot cover securely. (p.26)
The access lamp still blinks even when the power switch is set to <2>.
¡If you set the power switch to <2> right after shooting, the access lamp will still light/blink for a few seconds until the
camera finishes recording the image onto the CF card.
sWhen the camera finishes recording the image to the CF card, the access lamp will stop blinking and the power will turn off automatically.
The battery becomes exhausted quickly.
¡The battery is not fully charged. s Recharge the battery fully. (p.20)
¡The battery’s service life has expired. s Replace the battery pack with a new one.
154