Preparing to Print
wPictBridge
ACP Direct
SBubble Jet Direct
6Playback the image.
¡ Press the <x> button.
sThe image will appear and one of three icons <w/ A/ S> will appear on the upper left to indicate that the camera is connected to the respective type of printer.
sThe Direct print button lamp will light in blue.
¡The procedure will be different depending on the icon displayed. See the applicable pages below.
Icon | Reference pages |
w123 - 128
A123, 124, 129 - 131
S123, 124, 132 - 134
¡If the camera is running by battery power, make sure it is fully charged. During direct printing, keep checking the battery level.
¡If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what’s wrong, do the following:
Press the <x> button to playback the image and follow the steps below.
1.Press <0>.
2.On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. See “Error Messages” on page 128.
¡Before disconnecting the cable, turn off the camera and printer. Pull out the cable while holding the plug, not the cord.
¡When connecting the camera to the printer, do not use any cable other than the dedicated interface cable.
For direct printing, using AC Adapter Kit ACK700 (optional) to power the camera is recommended.
122