jSelf-timer Operation

Use the self-timer when you want to be in the picture. You can use self- timer in any Basic Zone mode or Creative Zone mode.

1

2

Select <Q>.

¡Look at the LCD panel and press the <iQ> button to select <Q>.

Focus the subject.

¡Look in the viewfinder and press the shutter button halfway to check that the focus confirmation light <o> is on and the exposure setting is displayed.

3 Take the picture.

¡ Look through the viewfinder and

press the shutter button completely. s The beeper will sound, the self-timer lamp will start blinking, and the shot

will be taken about 10 sec. later.

During the first 8 sec., the beeper beeps slowly and the lamp blinks slowly. Then during the final 2 sec., the beeper beeps faster and the lamp stays lit.

sDuring the self-timer operation, the LCD panel counts down the seconds until the picture is taken.

Do not stand in front of the camera when you press the shutter button to start the self-timer. Doing so will throw off the focus.

¡Use a tripod when you use the self-timer.

¡To cancel the self-timer after it starts, press the <iQ> button.

¡When using the self-timer to shoot only yourself, use focus lock (p.75) for an object at about the same distance as where you will be.

¡You can also silence the beeper. (p.50)

48