Using EOS-Dedicated, External Speedlites

¡ Before attaching an external Speedlite, retract the built-in flash if it is popped up.

¡If the EX-series Speedlite’s firing mode is set to TTL autoflash with the Custom Function, the Speedlite will not fire.

¡ If autofocus cannot be achieved, the external, EOS-dedicated Speedlite’s AF-assist beam (if the Speedlite has an AF-assist beam) will be emitted automatically (except in the <3> <5> <7> modes).

¡The camera is a Type-A camera that can use all the features of EX- series Speedlites.

Using Non-Canon Flash Units

The camera can synchronize with compact, non-Canon flash units at 1/ 200 sec. or slower. Be sure to test the flash unit beforehand to make sure it synchronizes properly with the camera.

¡ If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result.

¡Do not attach a high-voltage flash unit on the camera’s hot shoe. It might not work.

ULCD Panel Illumination

The LCD panel is provided with illumination.

To illuminate the LCD panel, press the <U> button (9). To turn off the illumination, press the button again. Use it to read the LCD panel in the dark.

¡ Pressing any shooting-related button or turning the Mode Dial while the LCD panel is illuminated prolongs the illumination.

¡When the camera is connected to a printer and the <U> button turns blue, the button functions as a Direct print button. (p.123)

102