3Open the roller cover on the main unit by placing your fingers in the grooves and pulling it down.

Contents

Back

 

Previous Page Next Page

Attaching the Feeding Roller

1Insert the feeding roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the main unit.

4

5

Lift up the roller fixing lever (c), and slide it to the left (d).

2

Remove the feeding roller by moving it to the left to detach it from its shaft, and pull it out of the slot.

3

Slide the roller fixing lever to the right to lock the roller into the hole on the left of the feeding roller.

Push down the lever to lock the shaft of the feeding roller into place.

102