2Click the [Register new job] button.
The [Register new job] dialog box appears.
NOTE
If you select a registered job and click [Job list/edit], the [Job editing] dialog box appears allowing you to edit the settings of the selected job.
3Configure the job settings.
a Select an [Unconfigured] job number from the job list. If you select a job that is already registered, the title bar display changes to [Job editing].
b Enter the job name.
c Specify the output method. d Configure the job settings.
b
c
a
d
Job settings are configured in the following three tabs.
Back |
|
[Output settings] tab
Configure settings for the output method. The items that appear in this tab differ depending on the [Output method] selected.
[Scanner setting] tab
Configure scan conditions.
43