For a TWAIN driver, the default value is set to "LTR" and cannot be changed.

3Select [Canon DR-2510C] or [Canon DR-2010C] → click [OK].

NOTE

If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See "Installing the Software," on p. 13)

4Select the default page size from the drop-down list → click [OK].

NOTE

• The [Configure Device Settings] dialog box is displayed only when you select [Canon DR-2510C] or [Canon DR-2010C] for the first time and click [OK], or when you click [Setup] for [Scanner Selection].

• The settings here are applied when you click the [Default] button on the ISIS

• driver properties dialog box.

5From the [Scan] menu, select [Scanner Setting].

The ISIS/TWAIN driver properties dialog box is displayed.

Contents

Back

 

Previous Page Next Page

Scanner selection under Mac OS X

As an example, the following explanation describes the procedure when using Image Capture, a standard-installed application for Mac OS X.

1Start Image Capture.

To start Image Capture, click the hard disk icon (e.g. [Macintosh HD]), the [Applications] folder, and then the [Image Capture] icon.

2Click [Browse Devices] in the [Devices] menu.

3Select the scanner you want to use, and select the [Use TWAIN software] check box.

4Click [OK].

61