NOTE
If you are using a TWAIN driver, the two extra settings below are displayed on the [Basic] tab and [Image processing] tab. Refer to the Help for details.
Scanner driver settings screen under Mac OS X
The Scanner driver settings screen under Max OS X has a Simple Mode and an Advanced Mode. (In the default condition after installation of the scanner driver, the screen will open in Simple Mode.) You can switch between modes by clicking the tabs at the top of the properties screen.
Simple Mode | Advanced Mode |
Back |
|
IMPORTANT
•If you switch modes, any settings configured up to that point will be discarded.
•If the TWAIN driver settings screen is called from CaptureOnTouch, the screen is always in Advanced Mode. You cannot switch to Simple Mode.
63